TU 20.30.12-039-12288779-2017 (instead of TU 2312-039-12288779-2004)

ZINC-RICH ETHYL SILICATE PRIMER FOR INTEROPERATIVE PROTECTION

Double-packed

Color: grey. Coating: matte

Detailed characteristics      Find out the price

Recommended use

ZVES-MO primer is used for anticorrosive protection of metal workpieces, parts and assembly units for the period of storage in atmospheric conditions between manufacture and installation and during transportation. Also, the ZVES-MO primer is used to protect and seal threaded pipe connections.

 

Specifications

It has accelerated drying time;

Allows all-season application (from -15 oC to +40 oC);

Provides protector protection of steel (contains zinc powder).

AREAS OF APPLICATION

ZVES-MO primer is used in transport, industrial and civil construction, shipbuilding.

 

RECOMMENDATIONS FOR USE

The material is approved and recommended for use by industry specialized testing centers.

 

Lacquer Coating Research Institute with "Victoriya" experimental machine-building plant

DESCRIPTION

There are often cases when a long period of time passes between the manufacture of metal structures, their transportation and installation. At the same time, precipitation, high humidity or an aggressive industrial environment can cause corrosion during storage. In order to protect finished metal products for the storage period, VMP Holding has developed a special primer ZVES-MO. It is applied to the metal surface with a thin layer, which provides proper protection of metal structures from corrosion during interoperative storage. At the same time, products coated with ZFES-MO can experience welding, cutting. A single-layer coating does not affect the quality of the weld.

 

ZVES-MO can be overlapped with epoxy and polyurethane materials produced by VMP.

 

TECHNICAL SPECIFICATIONS

 Coating

 Thickness of one dry layer           15 - 25 microns

 Adhesion     1 grade, no more than

 Thermal resistance in atmospheric conditions 150 °C

 Primer

 Density         1.85 – 2.05 g/cm3

 Viscosity       thixotropic

 Solids by mass        65 % - 72 %

 Pot life after mixing

 at a temperature of (23 ±5) ° C   8 hrs, not less than

 Drying time to degree 3 according to GOST 19007-73

 at a temperature of (20 ±2) °C

 and relative humidity (65±5) %    20 min, no more than

CONSUMPTION PER M2

The theoretical consumption for a single-layer coating is 90-150 g/m2.

 

SURFACE PREPARATION

degrease the metal surface to the first degree according to GOST 9.402-2004;

clean by abrasive blasting method to degree 2 according to GOST 9.402 (Sa 2 1/2 or Sa 3 according to ISO 8501-1) with roughening. The recommended surface profile is sharp-angled (grit), surface roughness should be from 25 to 60 microns (thin according to ISO 8503-1, comparator "G", segments 1-2);

remove abrasive and dust.

Before applying the coating layers, the surface of the ZVES-MO coating must be free from corrosion products, grease and other contaminants, dust-free.

 

INSTRUCTIONS FOR USE

before application, mix the primer base thoroughly until the sediment disappears completely at the bottom of the container and a homogeneous suspension is obtained;

add the binding agent into the base with constant stirring (proportion 100: 15 by mass, respectively);

Primer is recommended to be applied at temperatures from minus 15 °C to plus 40 °C and relative air humidity from 30 % to 80 % (best practical from 50 % to 80 %).

 Airless spraying

 

 Recommended diluent      SOLV-ES (TU 2319-080-12288779-2009),

 Nozzle diameter      0.015" - 0.019" (0.38 - 0.48 mm)

 Pressure      10 - 15 MPa (100 - 150 bar)

 Air spraying

    

 Recommended diluent      SOLV-ES

 Nozzle diameter      1.8 - 2.2 mm

 Pressure      0.3 - 0.4 MPa (3 - 4 bar)

 Brush / Roller

 

 Recommended diluent      SOLV-ES

 Equipment cleaning

 SOLV-ES,

 solvent 646

STORAGE OF ANTI-CORROSIVE PRIMER

The primer is packaged in metal buckets or cans and plastic cans.

 

Storage and transportation of the primer – in accordance with GOST 9980.5-2009 (at ambient temperature from minus 40 ° C to plus 40 ° C). Containers with a primer should not be exposed to atmospheric condensation and direct sunlight.

 

The shelf life of the primer base (zinc paste) in hermetically enclosed original container is 12 months, binding agent – 6 months starting with the manufacture date.

 

SECURITY MEASURES

When working with the primer, the existing sectoral standard norms and requirements and safety measures as specified on the package label shall be observed.

 

It is necessary to use personal protective equipment (glasses, masks, respirators), avoid inhaling solvents during evaporation and getting the primer on the skin, mucous membranes of the eyes and respiratory tract; use indoors only with sufficient ventilation.

 

The primer is classified as fire-hazardous material.

 

COMPATIBILITY OF THE ZVES-MO PRIMER WITH OTHER VMP MATERIALS

ZVES-MO primer is compatible with polyurethane compositions: ALUMOTAN, POLYTON-UR, FERROTAN, ZINOTAN, as well as with epoxy compositions: ZINEP, ISOLEP-mastic, ISOLEP-mio.

Information provided is general in nature and does not take into account the specifics of a particular object.

Compatible materials:

 

ALUMOTAN

 

 

ISOLEP-mastic

 

 

ISOLEP-mio

 

 

FERROTAN

 

 

ZINEP

 

 

ZINOTAN

 

 

SOLV-ES