VINICOR®-62 type B
VINICOR®-62 type B
Epoxy-vinyl enamel
- Color: Red-brown, green, gray, black and others. Matte, uniform finish
- Packing: Double-packed
Description
Double-packed epoxy-vinyl enamel.Recommended use
Protective and decorative painting of anticorrosive coating systems of ship structures, used in sea and fresh water, including underwater and above-water body, boot topping, metal deck, tanks, deep tanks, battery rooms and other metal structures used in atmospheric conditions of all macroclimate areas, atmosphere types and placement categories according to GOST 15150. Coating: oil-, gasoline-proof, resistant to spills of oil and petroleum products, sea and fresh water, short-term exposure to hot water and steam, aggressive environments, sudden temperature changes (from minus 60 to plus 60 °C).Used as a finishing layer in complex coating systems with VINICOR-061 (TU 20.30.12-001-54359536-2018), VINICOR-marine (TU 20.30.12-004-67503963-2018), VINICOR-ecoprime (TU 2312-002-67503963-2011) primers, with VINICOR-63 (TU 2313-007-67503963-2013) varnish, as well as with other primers on
vinyl-epoxy and epoxy bases.
Certificates, Approvals
State registration certificate No. RU. 78.01.06.008.Е.000564.12.18 dated 11.12.2018 It has a certificate of voluntary certification system of the Russian River Register No. POCC RU.PO00.H00269.Surface preparation
The surface prepared for applying varnish coat should be cleaned from dirt, degreased, if necessary, dust and moisture shall be removed.Application
- mix the base thoroughly to homogenous condition before application;
- with constant stirring, add a hardener to the base and mix thoroughly.
- if necessary, the composition should be diluted to the working viscosity.
The temperature of the painted surface shall be above the dew point by at least 3 °C.
Prepared enamel shall be of temperature at least 15 °C.
The enamel is recommended to be applied in 2-3 layers using airless, conventional (air) spray by brush/roller.
The overlapping interval between the layers of enamel at a temperature (20±2)°C – not less than 3 hours. Hardening time depends on the temperature of the surface and ambient air, degree of dilution of the material, thickness of the coating, efficiency of ventilation and relative air humidity.
Holding time of the coating before operating in aggressive conditions is not less than 7 days at temperature from 15 to 22 °С.
Storage and handling
The material is delivered in packages: base and hardener packed in metal buckets and metal cans respectively depending on the set weight.Storage conditions of the enamel components – according to GOST 9980.5 (at air temperature from minus 40 to plus 40 °C). The container shall be protected from atmospheric condensation and direct sunlight.
The shelf life is determined by warranty storage of the base (24 months) and hardener ( 12 months) starting with the manufacture date.
Precautions
When working with the material, one shall observe the existing sectoral standard norms and requirements and safety measures as specified on the package label.One shall use personal protective equipment (goggles, face masks and respirators) and avoid inhalation of thinners and contact of the composition or its components with skin, eye mucosa, respiratory channels; use inside the premises is allowed only in case sufficient ventilation is provided.
The material and its components (base and hardener) are fire-hazardous!
The information is of general character, without consideration to the object specific nature. Use of materials for other purposes not specified here or in case other influencing factors are present shall be approved by the VMP Holding CJSC in writing. In case of absence of such approval the manufacturer is not held liable for the improper use of the material and the buyer falls from the right to present claims connected with the coating quality.