ISOLEP-mio

TU 2312-050-1228779-2005

EPOXY COATING, CONTAINS "IRON" MICA

Double-packed

Color: gray or mustard (shade is not standardized). Coating: semi-matt

Detailed characteristics      Find out the price

Recommended use

Epoxy enamel ISOLEP-mio is used for corrosion protection of metal structures in the atmosphere, including those with high corrosion activity. It is used in coating systems based on epoxy and organosilicon primers as an intermediate or coating layer (in the absence of intense solar UV radiation).

 

Specifications

Enamel ISOLEP-mio

 

It has increased barrier protection.

Coating

 

Water resistant;

It is resistant to spills of oil and petroleum products, solutions of salts, acids and alkalis.

AREAS OF APPLICATION

ISOLEP-mio is used for anti-corrosive protection of industrial and civil construction, chemical industry, metallurgy, energy.

 

RECOMMENDATIONS FOR THE USE OF ISOLEP-mio ENAMEL

The material has been approved and recommended for use by industry specialized testing centers and is included in regulatory documents regulating the activities of various industries.

 

Avtodor

TSNIIS

RPA " Lakokraspokratiye", Khotkovo

CERTIFICATION

Certificate of state registration No. RU.66.01.40.015.E.000134.12.10 from 03.12.2010.

 

Oil and gas complex: It meets the requirements of regulatory documents of Gazprom (for anticorrosive protection of offshore structures), Rosneft, Lukoil.

 

Transport construction: HUNDRED-01393674-007-2022 JSC "TSNIITS", STO 12288779-001-2020 GC "Avtodor"; accreditation of JSC "Russian Railways".

 

Industrial and civil construction: recommended for use according to GOST 9.401-2018, RD GM‑02‑18 Trust "Gidromontazh", "MMC "Norilsk Nickel".

 

Approved by testing centers: RPA "Lakokraspokratiye" ( (Khotkovo), the Institute of Anticorrosive Protection of Dresden (Germany), VNIIZHT, TSNIIS.

 

DESCRIPTION

Epoxy enamel ISOLEP-mio is used as an additional protective layer in complex coating systems. It is compatible with primers manufactured by VMP on an epoxy and ethyl silicate basis. The anti-corrosion pigment, such as "iron mica" pigment, contained in the enamel composition, prevents aggressive substances from penetrating to the primer layer, thus preserving the protective properties of the coating for an extended period of time. Epoxy enamel ISOLEP-mio is resistant to wet environments and spills of oil and petroleum products, solutions of salts, acids and alkalis. It is recommended for application in factory and field conditions in the temperature range from -10 OC to + 40 oC.

To protect against intense UV radiation on top of ISOLEP-mio, it is recommended to apply weather-resistant enamel POLYTON-UR (UV).

TECHNICAL SPECIFICATIONS

 Coating

 Thickness of one dry layer           80 - 200 microns

 Adhesion     1 grade, no more than

 Heat resistance

 (in a dry, non-aggressive atmosphere)* + 120 °C (constant)

 +150°C (short-term)

 Coating class          V

 Enamel

 Density         1.50 ± 0.05 g/cm3

 Viscosity       thixotropic

 Solids by mass        80,0 % - 84,0 %

 Drying time to degree 3 at a temperature of (20 ± 2) ° C according to GOST 19007       3,0, no more than

 Pot life after mixing

 at a temperature of (20 ±2) °C     1,5 hrs, not less than

CONSUMPTION PER M2

The theoretical consumption for a single-layer coating is 170-420 g/m2.

 

RECOMMENDED CONDITION OF THE PAINTED SURFACE

the surface must be pre-primed;

degrease (if necessary) to the first degree according to GOST 9.402;

remove moisture, dust.

INSTRUCTIONS FOR USE

mix the enamel base thoroughly until smooth;

with constant stirring, add a hardener to the base of the enamel (the ratio of the base and the hardener by weight is 5.2:1; by volume 3:1), after mixing, the enamel is ready for use;

dilute with the thinner to the working viscosity, if necessary.

Pot life of the enamel ISOLEP-mio depending on the ambient temperature is shown in the table:

Name of the indicator

 

Ambient temperature

 

+10 °C

 

+20 °C

 

+30 °C

 

Pot tlife of enamel ISOLEP-mio   

4 hrs.

 

1,5 hrs.

 

1 hrs.

 

 

Enamel is recommended to be applied in factory and field conditions at air temperatures from minus 10 to plus 40 ° C and relative humidity up to 85%.

 

Recommended application methods:

 

 Airless spraying

 

 Recommended diluent      SOLV-EP (TS 20.30.22-106-12288779-2018)

 Amount of solvent  up to 10% by mass

 Nozzle diameter      0.015" – 0.021" (0.38 - 0.53 mm)

 Pressure      10 - 15 MPa (100 - 150 bar)

 Air spraying

    

 Recommended diluent      SOLV-EP

 Amount of diluent   up to 10% by mass

 Nozzle diameter      1.8 - 2.2 mm

 Pressure      0.3 - 0.4 MPa (3 - 4 bar)

 Brush / Roller

 

 Recommended diluent      SOLV-EP

 Amount of solvent  up to 10% by mass

 Equipment cleaning

 SOLV-EP

 or thinners 646, P-4

Overcoating intervals of coating by ISOLEP-mio (at (20±2)°C) are given in the table:

 

Drying time

 

Underlying layer

 

ZINEP

 

ISOLEP-primer

 

ZFES

 

ISOLEP-mio

 

Other primers

 

Minimum to overcoating by ISOLEP-mio, h

4

 

2

 

6

 

3

 

24

 

Drying of the coating is natural, the drying time of the coating with a thickness of 80-100 microns, depending on the temperature, is given in the table:

 

Drying degree          Drying time at ambient temperature, °С

-10      0          10        20       30       40

Until dry

 

32       15       4          2          1.5      1

To the degree of 3, h

 

50       24       6          3          2          1

Minimum to overcoat, h

 

70       30       8          4          2          1

To handle*, h.

 

80       40       14        5          3          2

To packing and shipping *, h

 

88       44       17        10       6          4

To through dry, d

 

60       24       10        7          3.5      2

Maximum to overcoat

 

6 months.

*The specified curing time is recommended to be taken as a guideline for the technological process. In fact, the curing time depends on the temperature of the surface and ambient air, the degree of dilution of the material, the  thickness of the coating, the efficiency of ventilation, the relative humidity of the air, the design features of the structures and may differ from the indicated.

If the maximum time is exceeded and the structures are stored for a long time under the influence of sunlight, additional measures are necessary to improve the adhesion of the layers of the coating enamels – treatment of the coating with ISOLEP-mio using detergent MS-01 (TS 2381-095-12288779-2013). Application technology of MS-01 is given in the Technical Specification for the tool.

 

STORAGE OF ANTICORROSIVE ENAMEL

The enamel is supplied as a complete set: base and hardener, packed in metal buckets, metal cans, depending on the weight of the set.

 

Storage and transportation of enamel components (base and hardener) – in accordance with GOST 9980.5 (at ambient temperature from minus 40 to plus 40 ° C). During storage, the container should not be exposed to precipitation and direct sunlight.

 

Shelf life in hermetically enclosed original containers: base – 12 months and hardener – 18 months starting with the manufacture date.

 

SECURITY MEASURES

When working with the enamel one shall observe the existing sectoral standard norms and requirements and safety measures as specified on the package label.

 

It is necessary to use personal protective equipment (glasses, masks, respirators), avoid inhaling solvents during evaporation and getting the composition on the skin, mucous membranes of the eyes and respiratory tract; use indoors only with sufficient ventilation.

 

Enamel is classified as fire-hazardous materials.

 

COMPATIBILITY OF ISOLEP-mio ENAMEL WITH OTHER VMP MATERIALS

It is recommended for use in coating systems with ZINEP, ISOLEP-primer and ZVES primers, as well as with other epoxy or organosilicon primers.

The coating layers are POLYTON-UR (UV) and POLYTON-UR enamels, as well as other enamels on polyurethane and epoxy bases.

 

Information provided is general in nature and does not take into account the specifics of a particular object.

Compatible materials:

ISOLEP-primer

 POLYTON-UR

 POLYTON-UR (UV) grade A

 ZINEP

ZFES

SOLV-EP