TU 2312-018-1228779-99

POLYURETHANE COMPOSITION WITH ALUMINUM POWDER.

IT IS USED AS A PROTECTIVE AND DECORATIVE COATING.

Single-component, cured by air moisture

Color: silver-gray with glitter

Detailed feature       Find out the price

Recommended use

The composition of ALUMOTAN is recommended for corrosion protection of metal structures in the atmosphere, sea and fresh water, aqueous solutions of acids and alkalis, oil and petroleum products. ALUMOTAN is used as a finishing layer in coating systems based on zinc-filled compositions on polyurethane, epoxy and other bases, as well as as an independent coating.

 

Specifications

Composition of ALUMOTAN

 

Allows all-season application (from -15 oC to +40 oC);

Provides increased barrier protection.

Coating

 

Heat-resistant (up to 120 oC).

AREAS OF APPLICATION

The ALUMOTAN composition is used in the oil and gas and chemical industries, metallurgy, energy, as well as in civil and transport construction.

 

RECOMMENDATIONS FOR THE USE OF THE COMPOSITION ALUMOTAN

The material has been approved and recommended for use by industry specialized testing centers and is included in regulatory documents regulating the activities of various industries.

 

Bashneft

Russian Railways

Trust "Gidromontazh"

Research Institute of Coating Industry with Experimental Mechanical Plant "Victoria"

Central  Scientific Research Institute of Construction

All-Russian Scientific Research Institute of Railway Transport

Institute of Energy Resources Transportation Problems

BashNIPIneft

Institute of Ecology and Evolution Problems RAS named after A.N. Severtsov

CERTIFICATION

Certificate of state registration No. RU.66.01.40.015.E.000011.01.11 dated 28.01.2011

GOST 9.401 (amendment No. 2)

DESCRIPTION OF THE COMPOSITION OF ALUMOTAN

The composition of ALUMOTAN is used as a protective and decorative coating. The material contains an anticorrosive pigment, which gives the coating increased resistance to the effects of corrosive media. To protect metal structures from corrosion for a long time, ALUMOTAN is recommended to be used in combination with zinc-filled primers. In the complex coating system, ALUMOTAN performs the function of additional barrier protection, isolates the primer layer from environmental influences, thereby preserving its integrity for longer. The combined coating is resistant to spills of sea and fresh water, aqueous solutions of acids and alkalis, oil and petroleum products.

 

For painting metal structures at negative temperatures, ALUMOTAN is recommended to be used with the primers  ZINOTAN and ZFES.

 

TECHNICAL SPECIFICATIONS

Coating

Thickness of one dry layer 50 - 70 microns

Adhesion      1 grade, not more than

Impact strength        50, not less than

Elasticity when folding       2, not more than

Coating class           IV

Heat resistance in air          150 °C

Composition

Density          0.98 - 1.10 g/cm3

Non-volatile matter content           50,0 - 53,0 %

Drying time to degree 3 (GOST 19007)-73

at temperature of (20 ±2) °C

and relative humidity (65±5)%      3, not more than

CONSUMPTION PER M2

The theoretical consumption for a single-layer coating is 115-160 g/m2.

 

RECOMMENDED CONDITION OF THE PAINTED SURFACE

Before applying the composition ALUMOTAN, the primer  must first be cleaned of dirt, degreased and dust-free.

 

When using the ALUMOTAN composition as an independent coating it is necessary:

 

to degrease the metal surface to the first grade according to GOST 9.402-2004;

to clean  from  scale, rust and traces of old paint to 2  grade  according to  GOST 9.402-2004 (Sa 2  ½  or Sa 2 according to ISO 8501-1:2007).   Power tool  cleaning according to GOST 9.402-2004 to 3 grade (St 2 or St 3 according to ISO 8501-1:2007) is allowed;

to remove dust from the surface.

INSTRUCTIONS FOR USE OF THE COMPOSITION ALUMOTAN

mix the composition thoroughly to homogenous condition before application;

strain the composition through a grid with a mesh of 0.5 mm (500 μm);

if necessary, dilute to working viscosity before application;

in case of pause, limit contact with air (cover the bucket with the composition: put down the lid).

Apply in factory and field conditions at  temperatures from minus 15 °C to plus 40 °C and relative humidity from 30 % to 98 %.

 

When the relative humidity of the ambient  air rises, the drying time of the coating shortens In factory conditions, with relative humidity less than 30 %, to shorten (in 1.5 - 2.5 times) the drying time, it is recommended to use a drying agent composition for polyurethane paint materials (TU 2359 -047-12288779-2005).

 

The holding time of the primer before application of the ALUMOTAN composition at temperature of (20±2) °С and relative air humidity (65±5) %:

 

ZINOTAN coating – not less than 4 hours;

ZFES coating – not less than 6 hours;

ZINEP coating – not less than 4 hours.

When applying several layers of ALUMOTAN coating, each subsequent layer should be applied after the previous one has dried to "tack" (slight touch on the coating does not leave a trace and does not give a feeling of stickiness).

 

Drying of the coating is natural.

 

Airless spraying

Recommended thinner      Without dilution

Nozzle diameter       0.015" – 0.019" (0.38 - 0.48 mm)

Pressure       10 - 15 MPa (100 - 150 bar)

Air spraying

Recommended thinner      SOLV-UR (TU 2319-032-12288779)

a mixture of butyl acetate and white spirit in a

volume ratio of 1:1

Quantity up to 5 % by mass          volume ratio of 1:1

Nozzle diameter       1.8 - 2.2 mm

Pressure       0.2 - 0.4 MPa (2 - 4 bar)

Brush / Roller

Recommended thinner      SOLV-UR (TU 2319-032-12288779)

a mixture of butyl acetate and white spirit in a 

volume ratio of 1:1 

Quantity up to 5 % by mass          volume ratio of 1:1

 Equipment cleaning

SOLV-UR (TU 2319-032-12288779)

Thinner’s types 646, 647, 649

STORAGE OF ANTICORROSIVE COMPOSITION

The composition of ALUMOTAN is packed in metal buckets or metal cans.

 

Storage and transportation conditions of composition – according to GOST 9980.5-2009 (at air temperature from minus 40 °C to plus 40 °C). T The container with composition shall be protected from atmospheric condensation and direct sunlight.

 

The guaranteed shelf life of the composition is 6 months from the date of manufacture.

 

PRECAUTIONS

When working  with the composition,  one shall observe the existing sectoral standard norms and requirements and safety measures as specified on the package label.

 

Personal protective equipment (goggles, face masks and respirators) shall be used, inhalation of thinners and contact of the composition or its components with skin, ocular mucosa, respiratory channels shall be avoided; use inside the premises is allowed only in case sufficient ventilation is provided.

 

The composition is classified as a fire-hazardous material.

 

COMPATIBILITY OF THE COMPOSITION OF ALUMOTANE WITH OTHER VMP MATERIALS

ALUMOTAN has good compatibility with zinc-filled primers of VMP: ZINOTAN, ZINEP and ZFES

 

The information provided is general in nature and does not take into account the specifics of a particular object.

Compatible Materials:

 

ZINEP

 

 

ZINOTAN 

 

 

ZFES

 

 

SOLV-UR

 

 

Drying Accelerator