ALISTERUS 1702
ANTI-GRAFFITI VARNISH
Single-component
Colour: transparent, possible color matching according to the color maps RAL, NOVA, NCS, SYMPHONY
Detailed feature Find out the price
Recommended use
Anti-graffiti protection for mineral surfaces of the structures and buildings (concrete, plaster, natural stone, brick), operated in the atmospheric environment of all macroclimatic areas, types of atmosphere and placement categories in accordance with GOST 15150.
AREAS OF APPLICATION
ALISTERUS 1702 varnish is used as an top protective coating in the comprehensive systems of concrete and mineral surface protecting coatings with the primer-enamel ALISTERUS 3105.
CERTIFICATION
Certificate of state registration No. RU.60.01.40.015.E.000003.01.21 dated 22.01.2021.
It is approved by the test center of Research Institute of Transport Construction JSC (TsNIIS JSC).
TECHNICAL SPECIFICATIONS
Coating
Gloss Semi - gloss
Heat resistance in the open air 100 °C
Graffiti removal by water, pressure 100-120 atm
Lacquer
Density, g/cm3 (non-tinted) 0,9-1,0
Viscosity
Thixotropic
Non-volatile matter content 65-69 % by weight
Recommended number of coats 2, not less than
Drying time to degree 3 at (20±2) °C, h 8, not more than
CONSUMPTION PER M2
Theoretical spreading rate for one coat, g/m2
RECOMMENDED CONDITION OF THE PAINTED SURFACE
The primer coating should be free of dirt, dust, moisture, ice and degreased.
INSTRUCTIONS FOR USE
Stir thoroughly before use to the homogenous condition;
If necessary, dilute to the working viscosity with the solvent ALISTERUS 5001 immediately before application;
It is recommended to apply the varnish at a temperature of +5 to +30 ° C and relative humidity between 30 and 80 %;
It is forbidden to use the material on frozen and wet bases, also with condensation moisture. The temperature of the surface to be painted must be above the "dew point" at least 3°C.
Recommended application parameters:
Airless spraying Recommended thinner ALISTERUS 5001
Quantity up to 5 % by mass
Nozzle Diameter 0.013" - 0.021" (0.33 - 0.53 mm)
Pressure 10 - 15 MPa (100 – 150 bar)
Air spraying Recommended thinner ALISTERUS 5001
Quantity up to 5 % by mass
Nozzle size 1.8 - 2.2 mm
Pressure 0.2 - 0.4 MPa (2 - 4 bar)
Brush/roller Recommended thinner ALISTERUS 5001
Quantity up to 5 % by mass
Drying of the coating is natural. In the case of multi-coat coatings, each subsequent layer of varnish should be applied after drying of the previous layer to the 3rd degree (GOST 19007). The complete drying time of the coating before use is 7 days.
Removing the film of unauthorized graffiti from the surface of the anti-graffiti varnish carried out manually (with small areas of vandal drawings) or water under pressure 100-120 bar using Karcher or similar units, specific conditions washes by prior arrangement.
PACKAGING STORAGE OF VARNISH ALISTERUS 1702
The varnished is supplied in the metal buckets with a capacity of 20 l and 10 l.
It is recommended to store in a tightly closed and sealed container without exposure to air and moisture, in the closed warehouse at an ambient temperature from +5°C to +25°C. During storage, the container shall not be exposed to atmospheric precipitation and direct sunlight.
The guaranteed shelf life in a tightly close and sealed manufacturer's container should be 12 months from the date of manufacture.
PRECAUTIONS
When working with varnish, the relevant industry standards and requirements should be observed, as well as the precautions indicated on the packaging label.
It is necessary to use personal protective equipment (goggles, masks, breathing masks), avoid inhalation of solvents during evaporation and contact of the compound with the skin, eye mucous membranes and respiratory tract; indoor use with adequate ventilation only.
Varnish classified as a fire-hazardous materials.
Compatible Materials:
ALISTERUS 3105
Single-component
Colour: transparent, possible color matching according to the color maps RAL, NOVA, NCS, SYMPHONY
Detailed feature Find out the price
Recommended use
Anti-graffiti protection for mineral surfaces of the structures and buildings (concrete, plaster, natural stone, brick), operated in the atmospheric environment of all macroclimatic areas, types of atmosphere and placement categories in accordance with GOST 15150.
AREAS OF APPLICATION
ALISTERUS 1702 varnish is used as an top protective coating in the comprehensive systems of concrete and mineral surface protecting coatings with the primer-enamel ALISTERUS 3105.
CERTIFICATION
Certificate of state registration No. RU.60.01.40.015.E.000003.01.21 dated 22.01.2021.
It is approved by the test center of Research Institute of Transport Construction JSC (TsNIIS JSC).
TECHNICAL SPECIFICATIONS
Coating
Gloss Semi - gloss
Heat resistance in the open air 100 °C
Graffiti removal by water, pressure 100-120 atm
Lacquer
Density, g/cm3 (non-tinted) 0,9-1,0
Viscosity
Thixotropic
Non-volatile matter content 65-69 % by weight
Recommended number of coats 2, not less than
Drying time to degree 3 at (20±2) °C, h 8, not more than
CONSUMPTION PER M2
Theoretical spreading rate for one coat, g/m2
RECOMMENDED CONDITION OF THE PAINTED SURFACE
The primer coating should be free of dirt, dust, moisture, ice and degreased.
INSTRUCTIONS FOR USE
Stir thoroughly before use to the homogenous condition;
If necessary, dilute to the working viscosity with the solvent ALISTERUS 5001 immediately before application;
It is recommended to apply the varnish at a temperature of +5 to +30 ° C and relative humidity between 30 and 80 %;
It is forbidden to use the material on frozen and wet bases, also with condensation moisture. The temperature of the surface to be painted must be above the "dew point" at least 3°C.
Recommended application parameters:
Airless spraying Recommended thinner ALISTERUS 5001
Quantity up to 5 % by mass
Nozzle Diameter 0.013" - 0.021" (0.33 - 0.53 mm)
Pressure 10 - 15 MPa (100 – 150 bar)
Air spraying Recommended thinner ALISTERUS 5001
Quantity up to 5 % by mass
Nozzle size 1.8 - 2.2 mm
Pressure 0.2 - 0.4 MPa (2 - 4 bar)
Brush/roller Recommended thinner ALISTERUS 5001
Quantity up to 5 % by mass
Drying of the coating is natural. In the case of multi-coat coatings, each subsequent layer of varnish should be applied after drying of the previous layer to the 3rd degree (GOST 19007). The complete drying time of the coating before use is 7 days.
Removing the film of unauthorized graffiti from the surface of the anti-graffiti varnish carried out manually (with small areas of vandal drawings) or water under pressure 100-120 bar using Karcher or similar units, specific conditions washes by prior arrangement.
PACKAGING STORAGE OF VARNISH ALISTERUS 1702
The varnished is supplied in the metal buckets with a capacity of 20 l and 10 l.
It is recommended to store in a tightly closed and sealed container without exposure to air and moisture, in the closed warehouse at an ambient temperature from +5°C to +25°C. During storage, the container shall not be exposed to atmospheric precipitation and direct sunlight.
The guaranteed shelf life in a tightly close and sealed manufacturer's container should be 12 months from the date of manufacture.
PRECAUTIONS
When working with varnish, the relevant industry standards and requirements should be observed, as well as the precautions indicated on the packaging label.
It is necessary to use personal protective equipment (goggles, masks, breathing masks), avoid inhalation of solvents during evaporation and contact of the compound with the skin, eye mucous membranes and respiratory tract; indoor use with adequate ventilation only.
Varnish classified as a fire-hazardous materials.
Compatible Materials:
ALISTERUS 3105